Question Title

* 1. Store City/State:

Question Title

* 2. Store Number:

Question Title

* 3. Machine Serial #:

Question Title

* 4. Your Name:

Question Title

* 5. Your Email address:

Check Hose Components

Question Title

Center Connector and Locking Collar G2/G3

Center Connector and Locking Collar G2/G3

Question Title

* 6. Locking Collar Assembly – connects the base hose to the machine by screwing on to the black place at the base of the machine on the same side of the plug or inlet.

Question Title

* 7. Base Hose – the first of two sections of 50’ pink hoses.

Question Title

Center Connector and Locking Collar G2/G3

Center Connector and Locking Collar G2/G3

Question Title

* 8. Center Connector – Metal tube that goes inside each section of hose and has two hose clamps to secure both hoses to the tube. (connects hose to hose).

Does machine have the following components?

Question Title

G2 Remote

G2 Remote

Question Title

G2 Remote

G2 Remote

Question Title

G3 Remote

G3 Remote

Question Title

G3 Remote

G3 Remote

Question Title

G4 Remote

G4 Remote

Question Title

* 9. Remote Hose – The second section of 50’ hose that has a remote attached a foot and a half from the end of the hose.

Question Title

* 10. Remote Transmitter – A remote transmitter should be attached by zip ties approximately a foot and a half from the end of the hose.

Question Title

* 11. Is there visible damage to any of the hose components?
Note: Some stores may tape sections of hose to prevent damage to drywall or home furniture. Tape does not necessarily mean there is a problem.  If the tape is covering a cut or hole in the hose that you can see or feel, this section will need replaced.  If either couplers (locking collar or center connector) are being held onto the hoses by tape, they may simply just be missing hose clamps. All stores carry clamps and you should advise the store to replace the tape with a hose clamp.

Physical Machine Condition

Question Title

AttiCat G2

AttiCat G2

Question Title

AttiCat G3

AttiCat G3

Question Title

AttiCat G4

AttiCat G4
Without having to take apart the machine, are the following components in good shape and not damaged?

Question Title

* 12. Is the plexiglass window secure and not hanging freely from any of the four sides. Do not push on the window as it may loosen the glue and become detached.

Question Title

* 13. Control Panel – below the opening of the upper feeder where the material is inserted, are all buttons intact and not damaged?

Question Title

* 14. Control Panel – below the opening of the upper feeder where the material is inserted, are any buttons missing?

Question Title

* 15. Latches to secure the upper feeder to the base of the machine - 
-   Gen 2 machines have 4 latches to secure the upper feeder. Are any damaged or missing?

Question Title

* 16. Latches to secure the upper feeder to the base of the machine - 
-   Gen 3 and 4 have one single latch on the opposite side of the control panel.  Is it damaged or missing?

Question Title

* 17. Two wheels at the base of the machine which allows the user to roll the machine – do both wheels have wheel washers and c-clips to help secure the wheels to their axels? 

Question Title

* 18. Any additional comments on this survey?

If you would like to send pictures, please email to marykate.walsh@owenscorning.com

T