ASHRAE Calculations from Audit to Final Quiz

MT Weatherization Training Center's "ASHRAE Calculations" Webinar Quiz

To gain BPI credit for the webinar, completion of this quiz is required. If you would like for us to submit for credit for you, please remember to provide your BPI number! A 70% or higher is required to receive BPI credits.

Question Title

* 1. Address

First and Last Name *

Agency Name *

BPI Number (if applicable)

City/Town *

State/Province *

Email Address *

Phone Number

Question Title

* 2. When calculating ASHRAE, the correct way of calculating the number of occupants in a home is...

Actual number of occupants in the home

Maximum number of occupants present during holidays

Number of bedrooms in the house minus one

Number of bedrooms in the house plus one

Question Title

* 3. Which criteria is not part of the calculation Corrective Action Plan (CAP) when determining ASHRAE rates?

Number of occupants

Building height

Unfinished basements

Conditioned area

Question Title

* 4. When asbestos containing materials (ACM) are present...

A. Grantees must state their policy on blower door testing

B. Work can proceed as scheduled if there is only a small amount

C. Client must have work done by a certified professional to be eligible for weatherization

D. A and C

Question Title

* 5. According to the new 17-7 WPN...

Radon mitigation is covered under the health and safety portion

Specifications for vapor barrier installation were added

Informed consent is required in zones 1 & 2

Workers' training requirements were decreased

Question Title

* 6. Static pressure will be increased in duct work in all of the following except...

When adding 45 degree and 90 degree bends

Creating a short and straight duct run

Increasing the length of the ducts

Static pressure is not affected by duct work

Question Title

* 7. When determining static pressure, the unit used is...

Pascals

Torr

mm Hg

Inches H2O

Question Title

* 8. When exhaust venting in present outside of the thermal boundary, the required level of insulation to reduce condensation according to SWS is...

R-6

R-8

R-10

R-20

Question Title

* 9. When installing a fan, which factor(s) should be considered?

A. Noise Level

B. CFM/Watt Rating

C. Flow Rate

D. A and C

E. All of the above

Question Title

* 10. A useful online tool for calculating ASHRAE ventilation can be found at...

Bluecalc.com

Orangecalc.com

Redcalc.com

Purplecalc.com

Question Title

* 11. A fan is not classified as an ASHRAE fan until what has occurred?

The fan has been installed by a certified professional

The fan has been properly programmed by an installer

The CFM of the fan is determined

The fan is properly labeled with a sticker stating it meets ASHRAE standards

Question Title

* 12. Do you want to be added to our email newsletter list (no spam, we promise)?

Yes, please!

No, thank you.

I am already subscribed.